Happy Holidays

[KenG]

Good job Shaos! I just ordered an IDE cable and IDE CF reader to see if I can get them to work together. These threads inspire me to do more than I ever nought I could.

[Shaos]

Good job Shaos! I just ordered an IDE cable and IDE CF reader to see if I can get them to work together. These threads inspire me to do more than I ever nought I could.

I think cable is not needed in case of CF, because you can get CF-to-IDE adapters for $2 from Ebay (Shenzhen) and it works



P.S. It's directly connected to JR-IDE:



P.P.S. I tried a few other sizes and only 16 MB worked with DOS 3.20. CFs 32 MB from CISCO don't understand LBA. 256 MB has extended partition that DOS 3.20 doesn't recognize. 4GB is FAT32. I also bought a few 24MB and 30MB - will see if they are ok with this setup...

[KenG]

I need the cable to try to get them to work together. Two devices, master and slave. You might try re-partition and re-format on the Jr. That is why I decided on DOS 5.0. Bigger partitions and more compatible with newer systems.

[Shaos]

I bought dual adapter for about $3 - waiting

[Shaos]

Finally I'm here again



This is my new basement setup near Denver, CO

(I moved from Long Island, NY at the end of 2017)

[KenG]

Looks nice!