PCJR Serial Cable 3D Print

Software related questions

PCJR Serial Cable 3D Print

Postby Chuckphd53 » Fri Sep 28, 2018 6:36 am

(just noticed I put this in the SOFTWARE Forum) if you would like to move it (mike) please do ! sorry.....

I needed a breakout for a mouse using the Serial port and thought I'd make a cable from scratch...
here is a 3D printed version using standard Ribbon cable and DB9 connector.

Note: Pin 9 is empty as the Jr does not support the RING Detect line.... All others are properly routed from the Back connector to the proper Pin assignment..
The fit is great, it has a nice PRESS in type hold as does the original, this is due to the 3D printing of LAYERS that grabs as it it inserted...


Image
Image
Image
Image
Image
Image
(PCJR/JR-IDE-512DOM,TandyMod,V20-10Chip,BiDir,LPT2,3FlopBrd,
USBEmulator,ZIP100,PS2Keybrd,MouseSysMouse,InternalSwitcherPS)
Chuckphd53
 
Posts: 215
Joined: Sun May 13, 2018 9:15 am
Location: Florida, USA

Return to PCjr Software

Who is online

Users browsing this forum: No registered users and 1 guest