jrIDE - time for another production run?

Hardware questions and modifications

Re: jrIDE - time for another production run?

Postby KenG » Mon Jul 18, 2016 11:41 am

I am also interested. If iI can get one I will have 2 x 128K sidecars to sell.
Enhanced PCjr with a jr-IDE (1GB DOM) and a parallel port side car with a compact flash reader and backpack 1.44mb floppy attached. Tandy video mod.
KenG
 
Posts: 149
Joined: Sat Jul 16, 2016 5:36 pm

Re: jrIDE - time for another production run?

Postby KenG » Wed Jul 27, 2016 4:52 am

I would also be interested. I would prefer to get it made and tested, but I guess I can try to build from kit.
Enhanced PCjr with a jr-IDE (1GB DOM) and a parallel port side car with a compact flash reader and backpack 1.44mb floppy attached. Tandy video mod.
KenG
 
Posts: 149
Joined: Sat Jul 16, 2016 5:36 pm

Re: jrIDE - time for another production run?

Postby seeker010 » Fri Sep 09, 2016 8:39 pm

definitely interested if there is going to be another run :D
seeker010
 
Posts: 1
Joined: Mon Sep 05, 2016 9:35 am

Re: jrIDE - time for another production run?

Postby ianoid » Thu Nov 03, 2016 4:58 pm

In case I didn't post, I'd love to pick one of these up too!
ianoid
 
Posts: 2
Joined: Sat Sep 26, 2015 10:56 am
Location: Austin, TX

Re: jrIDE - time for another production run?

Postby OldComputerGuy » Fri Mar 24, 2017 4:22 pm

I would like one, too.
OldComputerGuy
 
Posts: 65
Joined: Sun Dec 04, 2016 7:28 pm

Re: jrIDE - time for another production run?

Postby Trixter » Fri Mar 24, 2017 7:40 pm

I've got two :-D but if there's another run I'm in for 1 or 2 more. 2 if you think you'll follow through with embedded wifi.
You're all insane and trying to steal my magic bag!
Trixter
 
Posts: 508
Joined: Mon Sep 01, 2008 12:00 am
Location: Illinois, USA

Re: jrIDE - time for another production run?

Postby alanh » Tue Mar 28, 2017 10:27 pm

I'm really behind on things and will be a bit out of pocket until a week after VCF-East this coming weekend. I'll follow up then. It's quicker and more reliable to email me at alan at alanlee d org
alanh
 
Posts: 252
Joined: Tue May 10, 2011 6:52 pm
Location: Atlanta, GA

Re: jrIDE - time for another production run?

Postby James » Wed Mar 29, 2017 2:23 pm

alanh wrote:I'm really behind on things and will be a bit out of pocket until a week after VCF-East this coming weekend. I'll follow up then. It's quicker and more reliable to email me at alan at alanlee d org


At what booth are you going to be at during VCF East? I plan on going and would love the opportunity to say hi.
-PCjr (1989)-DOS 3.3, Racore Drive II, jrIDE-128 MB DOM, jrExcellerator, Tandy Mod, Serial Card, Combo v2, Config Plus, IBM Parallel Port, Megaboard, Xircom PE3-10BT
-PCjr (2001)-DOS 3.3, jrIDE-128 MB DOM, NEC v20, Parallel Port, Comswap, Xircom PE3-10BT
James
 
Posts: 111
Joined: Sat Dec 22, 2012 10:04 am

Re: jrIDE - time for another production run?

Postby alanh » Wed Mar 29, 2017 4:40 pm

I'm not exhibiting. I'll just be wandering around.
alanh
 
Posts: 252
Joined: Tue May 10, 2011 6:52 pm
Location: Atlanta, GA

Re: jrIDE - time for another production run?

Postby rvdbijl » Sun May 21, 2017 12:58 pm

Looks like this thread has been inactive for a while -- But I would be interested in a JrIDE as well if available. Preferably pre-built, if that's an option. :)

Thanks!
rvdbijl
 
Posts: 6
Joined: Sun May 21, 2017 11:16 am

PreviousNext

Return to PCjr Hardware

Who is online

Users browsing this forum: pinesbrook and 1 guest