Page 1 of 1
jr-IDE C4, C9 & C11 voltage rating?
Posted: Tue Sep 29, 2020 11:09 am
by antongale
I'm currently in the process of building a jrIDE and the BOM description for C4, C9 & C11 states a 50V rating for the 22uF capacitors. Both the Mouser and Digikey links utilize 6.3V parts.
I assume the 6.3V part is OK, but I thought I'd check.
Re: jr-IDE C4, C9 & C11 voltage rating?
Posted: Tue Sep 29, 2020 6:55 pm
by FortMax
It'll be fine. If they see more than ~5v, those caps are going to be the least of your problems
Re: jr-IDE C4, C9 & C11 voltage rating?
Posted: Fri Oct 02, 2020 5:44 pm
by alanh
Anything ceramic and 10V or higher. I recommend using temp types X7R, X5R, or C0G/NP0.
Re: jr-IDE C4, C9 & C11 voltage rating?
Posted: Sat Oct 03, 2020 1:08 pm
by antongale
Thank you for the replies. Everything is built and running, I did use 6.3V capacitors, so I'll swap them out at the next opportunity.