Drivparm and DOS 3.3
Posted: Mon Sep 20, 2021 4:50 am
Hi! I haven't posted in awhile, and I meant to post this for a long time.
This is what I used in my config.sys : Drivparm=controlAcontrolAcontrolA /d:0 /c /f:2 /h:2 /s:9 /t:80
Drivparm=controlAcontrolAcontrolA /d:1 /c /f:2 /h:2 /s:9 /t:80
This is what I used because I used a 1.44 floppy drive.
It's drive a: and b:. To test it , use format to see if it formats a 720kb floppy.
I don't have that jr anymore, but I think that's what I did.
This I found looking for the txt about the "control A".
http://www.uncreativelabs.net/textfiles/dos/BDRIVE.TXT
This is what I used in my config.sys : Drivparm=controlAcontrolAcontrolA /d:0 /c /f:2 /h:2 /s:9 /t:80
Drivparm=controlAcontrolAcontrolA /d:1 /c /f:2 /h:2 /s:9 /t:80
This is what I used because I used a 1.44 floppy drive.
It's drive a: and b:. To test it , use format to see if it formats a 720kb floppy.
I don't have that jr anymore, but I think that's what I did.
This I found looking for the txt about the "control A".
http://www.uncreativelabs.net/textfiles/dos/BDRIVE.TXT